由于富美家抗倍特板材的質地很堅硬，因此在加工時應注意以下的幾個方面：

Due to the hard texture of Formica anti doubling plate, the following aspects should be paid attention to during processing:

1、開料時應以直線鋸切為主。通常可先在板材上畫好規格尺寸，然后再鋸切，如果工件的尺寸為標準尺寸，可先用模板劃線再進行鋸切，這會方便得多。

1. Linear sawing shall be used for cutting. Generally, the specification and size can be drawn on the plate before sawing. If the size of the workpiece is the standard size, the template can be used for scribing before sawing, which will be much more convenient.

2、開孔時可利用手提曲線鋸進行切割，切割速度以3-4m/min為宜，如切割速度過快一方面會使切割邊緣產生爆口等缺陷，另一方面也會影響鋸條的使用壽命，增加不必要的加工成本。

2. The hand-held curve saw can be used to cut the hole. The cutting speed is 3-4m / min. if the cutting speed is too fast, on the one hand, the cutting edge will produce defects such as explosion, on the other hand, it will affect the service life of the saw blade and increase unnecessary processing costs.

3、加工異形邊沿時，應先在板件表面劃出所需尺寸，然后利用曲線鋸切割；如果批量生產時，可利用大型CNC進行切割，這樣可確保加工速度和鋸切質量。

3. When processing the special-shaped edge, the required dimension shall be drawn on the surface of the plate first, and then the curve saw shall be used for cutting; In case of mass production, large CNC can be used for cutting, which can ensure the processing speed and sawing quality.

4、加工邊緣時普遍采用的工具是手提鏤銑機，在作業前應清除板件表面的灰塵或異物，以免在板件表面留下劃痕或刻痕。鏤銑機的加工速度應保持在2m/min為宜，如果鏤銑刀刀刃角度較小而工件厚度又較厚時，鏤銑機的加工速度應適當放慢。

4. The commonly used tool for edge processing is a hand-held router. Before operation, the dust or foreign matters on the surface of the plate shall be removed to avoid scratches or nicks on the surface of the plate. The processing speed of the router should be kept at 2m / min. if the cutting edge angle of the router is small and the workpiece thickness is thick, the processing speed of the router should be appropriately slowed down.

另外銑刀刃的長度應大于加工件的厚度，以保證一次走刀能銑削出邊緣的線型。走刀時鏤銑刀應從高處逐步向低處下滑直至鏤銑刀刃包容銑削邊緣。值得注意的是，走刀時一定要保持平穩，不要讓鏤銑機晃動。晃動會使工件的邊緣形成不規則波紋，給后道砂磨拋光工序增加工作量，影響加工效率。

In addition, the length of the milling blade shall be greater than the thickness of the workpiece, so as to ensure that the linear shape of the edge can be milled in one pass. When cutting, the router shall slide from high to low until the router edge contains the milling edge. It is worth noting that the cutter must be kept stable when walking, and do not let the router shake. Shaking will cause irregular ripples on the edge of the workpiece, increase the workload of the subsequent sanding and polishing process, and affect the processing efficiency.

加工抗倍特板過程中的幾點注意事項就是這樣了，能夠給您幫助是我們所希望看到的，更多注意事項就來我們網站http://www.k3037.cn看看吧。

This is what we need to pay attention to in the process of processing anti magnification plates. We hope to help you. For more attention, please visit our website http://www.k3037.cn Let's see.